Takeuchi TB016

As of April 15th 2014, this model is discontinued. Replaced by the TB216.
Toggle

The Takeuchi TB016 compact excavator provides a nice blend of power and functionality. With a dig depth of 7 feet 10 inches and a maximum reach of over 13 feet, the Takeuchi TB016 can really deliver on the most demanding job-sites. It provides productivity and performance comparable to larger machines due to its precision pilot controls and four pump hydraulic system. With a retractable track width of less than 39 inches the Takeuchi TB016 can easily travel through gates and maneuver in tight residential areas where larger machines are at a disadvantage. This makes the Takeuchi TB016 perfectly suited for any job-site big or small.

For more information, or to demo the TB016, please call us at 914-347-6969 or visit one of our showrooms in Elmsford or the Bronx. Don’t forget to ask about our 0% financing!

Performance. Durability. Operator Comfort. Serviceability.

Click the tabs below to view the TB016 product specifications.

Operating Weight
3,524 lb (1,598 kg)
Width
39 / 51 in (980 / 1,300 mm)
Height
7 ft 5 in (2,280 mm)
Length (transport)
12 ft 1.5in (3,695 mm)
Ground Clearance
8.1 in (205 mm)
Min Front Swing Radius (90° boom swing)         
3ft 5.3in (1,050 mm)
Tail Swing Radius
3 ft 6.7 in (1,085 mm)
Dozer Blade (w/h)
39-51 in x 11.8 in (980-1,300 mm x 300 mm)

Max Dig Depth
7 ft 9.5 in (2,375 mm)
Max Dump Height
9 ft 4 in (2,845 mm)
Max Reach at Ground Level
12 ft 9 in (3,890 mm)
Max Vertical Dig Depth
6 ft 3 in (1,905 mm)
Max Dig Depth w/2 ft Flat Bottom      
7 ft 8 in (2,336 mm)
Max Dig Depth w/8 ft Flat Bottom        
5 ft 11 in (1,803 mm)
Max Bucket Dig Force
4,079 lb (1,850 kg)
Max Arm Dig Force
1,704 lb (773 kg)


Undercarriage

Traction Drive Type                             
Planetary
Parking Brake
Spring Applied, Hydraulically Released
Track Roller Type
Permanently Sealed, Triple Flange
Traction Force
3,801 lb (1,724 kg)
Track Rollers (per side)
3
Carrier Roller (per side)
Slide
Track Type
Rubber Crawler Belt
Track Width
9 in (230 mm)
Track Ground Contact Length                 
3 ft 9.5 in (1,155 mm)
Ground Pressure
3.9 psi
Travel Speed
1.5 to 2.4 mph (2.3 to 4.2 km/hr)


Swing System

Independent Boom Swing Angle (l/r)       
90° / 50°
Swing Speed (rpm)
9.0
Swing Reduction
Straight Drive
Swing Brake
Disc

System Operating Pressure             
2,844 psi (19.6 MPa)
Pump Type
2 piston / 2 gear
Hydraulic Flow (gpm)
4.33 x 2 / 2.67 x 1 / 1.8 x 1
Auxiliary Flow
8.7 gal/min (32.9 L/min)

Make/Model
Yanmar 3TNV70-STB
Tier Rating
EPA Tier 4
Cylinders/Displacement
3/52.1 cu in (.85 L)
Horsepower Net (SAE 1349 gross)         
13.5 hp (10.1 kW)
Maximum Torque
38 ft-lb @ 1,600 rpm (51.5 Nm)
Engine Lubrication
3.0 qt (2.8 L)
Cooling System
3.6 qt (3.4 L)
Fuel Tank Capacity
5.5 gal (21 L)
Fuel Consumption (65% of full load)         
0.50 gal/hr (1.9 L/hr)
Electrical System (volt/amp)
12 volts 40 amps

Fuel Tank
 5.5 gal (21 L)
Hydraulic Tank       
 6 gal (23 L)

 

Over Front Blade Down Over Side
+5 ft (1.5m) 813 lb (369 kg) 813 lb (369 kg)
Ground Level 1,552 lb (704 kg) 1,459 lb (662 kg)
-1.5ft (.45m) 1,799 lb (816 kg) 1,464 lb (664 kg)

ENGINE

  • EPA Tier 4 compliant
  • Automatic preheat
  • Extended life coolant
  • Automatic fuel bleed system
  • Dual element air cleaners

ELECTRICAL

  • Electronic monitoring system that includes visibile and audible alarms for low oil pressure and high engine coolant temperature, and battery charge level
  • 12 Volt system with 40 amp alternator
  • Canopy and boom mounted work lights
  • Preheat indicator
  • Hour meter
  • Travel alarm
  • High speed indicator
  • Horn
  • Water temperature gauge

UNDERCARRIAGE and FRAME

  • Triple flange track rollers
  • Hydraulically retractable track frame
  • Low and high range travel
  • Adjustable width backfill blade
  • Cast iron wrap around protective counterweight
  • 9″ rubber track

HYDRAULIC

  • Variable displacement piston pumps
  • Cushioned boom and arm cylinders
  • Precise and responsive pilot controls
  • Hydraulic oil cooler and sight gauge
  • Primary auxiliary circuit plumbed to arm with 1 – way and 2 – way operation

WORKING EQUIPMENT

  • Main boom cylinder guard
  • Bucket and auxiliary hydraulic hoses protected inside arm
  • Long arm
  • Available dual pin position bucket
  • Available mechanical bucket quick coupler
  • Available main pin hydraulic thumb

OPERATOR’S STATION

  • ROPS / TOPS / FOPS Four post canopy
  • Quick change control pattern (ISO or SAE)
  • Auxiliary hydraulics controlled with foot pedal
  • 2″ Seat belt
  • Available 3″ Seat belt

Click on the images below to enlarge.

Call Us Today at 718-697-6969 for a Free Quote or to Schedule a Demo.