Takeuchi TL8 Compact Track Loader

Powerful and nimble, the Takeuchi TL8 is the latest track loader in the Takeuchi line-up.  The Takeuchi TL8 Compact Track Loader features increased operating capacity and greater engine power allowing you to complete the toughest jobs.

Takeuchi has developed a new selectable attachment control system for the TL8 Loader that provides three adjustable attachment settings where you can program attachment specific hydraulic flow rates from the comfort of the operator’s seat.  This exciting new feature further enhances the capability of the TL8 Track Loader and enables you to optimize the machine to the job at hand.  When combined with the standard 14 pin connector, multi-function control handle, and fingertip proportional controls, you no longer have a compact track loader, you now have an extremely capable tracked tool carrier.

Designed for optimal operator comfort, the cab of the Takeuchi TL8 features a spacious interior with a fully adjustable high back suspension seat, a roll-up door for those nice days, and improved HVAC performance for those not-so-nice days.  To further sweeten the pot, the cab on TL8 is now pressurized, ride performance is improved, and the controls have been enhanced.

Unmatched and extremely responsive, the precision pilot controls found on the TL8 become an extension of the operator.  To improve versatility a pattern change selector valve is available and it allows the operator to quickly and easily change from standard ISO, Takeuchi controls to an “H” control pattern.

Finally, for superior strength and durability the Takeuchi TL8 features a fully welded, purpose built frame.  Integrated cross members and an industry exclusive undercarriage that maintains steel-to-steel contact between the large, heavy duty rollers and forged steel imbeds that are incorporated into the rubber track result in a long life track system that will withstand many hours on the job.  Double reduction planetary drives are exceptionally powerful and are positioned rearward allowing more contact points between the sprocket and the track delivering unparalleled traction forces and better track durability.

For more information, or to demo the Takeuchi TL8 skid steer, please call us at 914-347-6969 or visit one of our showrooms in Elmsford or the Bronx. Don’t forget to ask about our 0% financing!

Performance. Durability. Operator Comfort. Serviceability.

Click the tabs below to view the Takeuchi TL8 Compact product specifications.

Front Clearance Radius without Bucket
4 ft 6.0 in (1,375 mm)
Rear Clearance Radius
5 ft 2.7 in (1,590 mm)
Angle of Departure
30 degrees
Maximum Lift Height to Bucket Pin
9 ft 11.0 in (3,030 mm)
Dump Height Fully Raised
7 ft 9.0 in (2,370 mm)
Maximum Dump Angle Fully Raised
38.5 degrees
Maximum Bucket Rollback at Ground Level        
30.0 degrees
Reach Fully Raised
2 ft 4.7 in (730 mm)
Overall Width Without Bucket
5 ft 2.0 in (1,580 mm)
Overall Height
6 ft 11.9 in (2,130 mm)
Overall Length (without bucket)
8 ft 11.0 in (2,740 mm)
Minimum Ground Clearance
12.1 in (310 mm)

Hydraulic Reservoir Capacity      
10.6 gal (39.0 L)
Hydraulic System Capacity
15.3 gal (58.0 L)
Auxiliary Hydraulic Flow
18.4 gal/min (69.5 L/min)
Hydraulic System Pressure
3,046 psi (21 MPa)

Operating Weight – Canopy
8,345 lb
(3,785ikg)
Operating Weight – Cab
8,620 lb
(3,910ikg)
Tipping Load
6,020 lb
(2,731ikg)
ROC (SAE J818 standard 35% tipping load*)    
2,105 lb
(955ikg)
ROC with Optional Counter weight
2,323 lb
(1,054ikg)
Operating Load at 50% of Tipping Load
3,010 lb
(1,365ikg)
Bucket Breakout Force
6,834 lb
(3,110ikg)
Lift Arm Breakout Force
6,709 lb
(3,100ikg)
Traction Force
9,106 lb
(4,130ikg)
Cycle time
Raise-Full Load
4.0
seconds
Lower-No Load
2.7
seconds
Dump-Full Load
2.6
seconds
Curl-No Load
2.0
seconds

* Operating capacity of track loaders to be rated according to SAE J818
at no more than 35% of the tipping load

Make / Model
Kubota / V3307CRT
Cylinders / Displacement             
4/203 cu in (3.3L)
Horsepower Gross (SAE J1995)
74.3 hp (53.2 kW)
Horsepower Net (ISO 14396)
71.3 hp (51.0 kW)
Rated / Max Engine Speed
2,600irpm
Maximum Torque
192 ft-lb (260 Nm)
Engine Lubrication
11.2 qt (11.8 L)
Cooling System
13.7 qt (13.0 L)
Fuel Tank Capacity
19.8 gal (75 L)
Fuel Consumption (65% of full load)     
2.69 gal / hr (10.2 L/hr)
Electrical System
12 volts / 60 amps

Traction Drive Type
Hydrostatic Drive with Double Reduction Planetary Final Drive
Parking Brake
Spring Applied, Hydraulically Released Multiple Wet Friction Disc
Track Roller Type
Permanently Sealed Rollers with Metal Face Seals
Track Rollers
5 per side
Track Width
15.7 in (400 mm)
Track Ground Contact Length       
54.7 in (1,390 mm)
Ground Pressure – Canopy
4.4 psi (30.2 kPa)
Ground Pressure – Cab
4.5 psi (30.8 kPa)
Travel Speed – Low Range
4.5 mph (7.4 km/hr)
Travel Speed – High Range
6.8 mph (11.0 km/hr)

ENGINE

  • EPA Final Tier 4 compliant with DPF
  • Turbocharged engine
  • Automatic fuel-bleed system
  • Extended life coolant
  • Dual element aircleaner with standard pre-cleaner

ELECTRICAL

  • Electronic engine monitoring system
  • Fuel and coolant temperature gauge
  • 12 volt system with 60 amp alternator
  • Halogen worklights, front and rear
  • Engine preheat
  • Hour meter
  • Back-up alarm

UNDERCARRIAGE and FRAME

  • Permanently sealed track rollers with precision metal face seals
  • All welded track frame with multiple cross members
  • 2-speed travel
  • 15.7″ rubber track with integrated steel cables and forged steel inserts
  • Available 12.6″ rubber track with integrated steel cables and forged steel inserts
  • Grease type track adjuster

HYDRAULIC

  • Cushioned boom cylinders
  • Pilot controls
  • Electrohydraulic push button and proportional control of auxiliary hydraulics with standard detent and selectable one way operation
  • Boom float with detent
  • Standard pressure relieving flat faced coupler body
  • 14-pin connector with push button control
  • Hydraulic self leveling
  • Available control pattern change valve

WORKING EQUIPMENT

  • Radial boom design
  • Mechanical bucket quick coupler
  • Available Hydraulic quick coupler
  • Available 67″ HD smooth lip or tooth bucket (14.3 cu ft)
  • Available 76″ HD smooth lip or tooth bucket (20.3 cu ft)
  • Available 7′ Six way dozer blade
  • Available HD 48″ pallet forks and frame
  • Available Counterweight kit (350 lbs)

OPERATOR’S STATION

  • Tilt-up operator station
  • Pilot operated controls
  • Six-way adjustable suspension seat
  • Rear pivoting seat bar with integrated arm rest
  • Retractable seat belt
  • ROPS / FOPS structure
  • Available pressurized cab with roll-up door, air conditioning, heat, defrost, and wiper
  • Available 3″ retractable seat belt
  • Available 3 point retractable seat belt
  • AM / FM / Mp3 radio with NOAA weatherband

Click on the images below to enlarge.

Call Us Today at 718-697-6969 for a Free Quote or to Schedule a Demo.