Takeuchi TW80 Wheel Loader

The Takeuchi TW80 Wheel Loader has a compact design that allows them to easily maneuver in tight spaces with minimal damage to lawns, pavement, or other sensitive surfaces.  The TW80 provide incredible reach and dump height for outstanding material handling, and the spacious operator’s station is elevated giving the operator greater visibility and job site awareness.  The Takeuchi TW80 compact wheel loaders deliver power and precise control for increased productivity, and lower operational and maintenance costs which make them a great alternative to skid steer loaders.  So, whether you are loading mulch and sod, removing snow, feeding hoppers, or sorting and stockpiling material, you will find Takeuchi TW80 wheel loaders are an ideal choice for a variety of applications.

Performance. Durability. Operator Comfort. Serviceability.

Click the tabs below to view the Takeuchi TW80 Wheel Loader product specifications.

7 ft 2 in (2,180 mm)
Outside Turning Radius
13 ft 3 in (4,046 mm)
Max Lift Height to Bucket Pin
11 ft 1 in (3,380 mm)
Bucket Clearance Height
9 ft 11 in (3,025 mm)
Dump Height Fully Raised
8 ft 6 in (2,605 mm)
Max Dump Angle Fully Raised
45 Degrees
Max Bucket Rollback at Ground Level
48 Degrees
Reach Fully Raised
2 ft 5 in (740 mm)
Overall Width Without Bucket
6 ft 9 in (2,050 mm)
Overall Height
8 ft 10 in (2,685 mm)
Overall Length With Bucket
18 ft 3 in (5,580 mm)
Minimum Ground Clearance
18 in (460 mm)

Loader operating information and dimensions are based on the standard machine configuration,
1.3 cu. yd. bucket, 400 170 R20 tires, 165 lb (75 kg)operator.This information is affected by different
configurations and attachments.

Hydraulic Reservoir Capacity       
19.8 gal (75.0 L)
Auxiliary Hydraulic Flow
18.5 gal/min (70 L/min)
Auxiliary Hydraulic Pressure
4,061 psi (28.0 MPa)

Loader Boom Linkage Type
Operating Weight (w 165 lb operator)
Standard machine with bucket
12,677 lb (5,750 kg)
Tipping Load, Straight
9,420 lb (4,273 kg)
Tipping Load, Full Turn
8,294 lb (3,762 kg)
Rated Operating Capacity with bucket * (SAE J818)
4,147 lb (1,881 kg)
Bucket Breakout Force
15,287 lb (6,934 kg)
Lift Arm Breakout Force
13,567 lb (6,154 kg)
Traction Force
11,802 lb (5,354 kg)
Cycle Time
Raise – Full Load
6.0 (Seconds)
Lower – No Load
3.8 (Seconds)
Dump – Full Load
1.2 (Seconds)

* Operating Capacity is 50% of full turn tipping load with bucket according to SAE J818 

Deutz TD2011 Oil Cooled
Tier Rating
Tier 3
4/221 cu in (3.62 L)
Horsepower Gross (SAE J1995)      
80 hp (59.5 kW)
Horsepower Net (SAE 1349)
76 hp (57.1 kW)
Rated Engine Speed
2,600 rpm
Maximum Torque
177 ft-lb @ 1,600 rpm (240 Nm)
Engine Lubrication
11.6 qt (11.0 L)
Fuel Tank Capacity
26.4 gal (100 L)
Fuel Consumption (65% of full load)      
2.9 gal/hr (11.0 L/hr)
Electrical System
12 volts / 80 amps

Transmission Type
Hydrostatic Drive with 100% Hydraulic Inching Pedal
Axle Type
Rigid Axles With Outboard Planetary Reduction
Differential Lock
100% Differential Lock in Front and Rear Axles
Parking Brake
Spring Applied, Hydraulically Released, Multiple Wet Friction Disk
Service Brakes
Hydrostatic and Multi Wet Friction Disk
Tire Gauge
5 ft 4 in (1,640 mm)
Steering Articulation
40 Degrees Left / 40 Degrees Right
Frame Oscillation
12 Degrees Left / 12 Degrees Right
Maximum Travel Speed        
Low Range
4.0 mph (6.5 km/hr)
High Range
12.4 mph (20 km/hr)


  • EPA Tier 3 compliant, turbocharged, oil cooled
  • Dual element air cleaners with restriction indicator
  • High capacity engine oil cooler


  • Electronic engine monitoring system with fuel gauge, high beam indicator, turn signal indicators, high speed indicator
  • 12 Volt system with 80 amp alternator
  • Work lights, front and rear
  • Driving lights and turn signals
  • Directional lights, Fwd / Rev
  • Engine preheat
  • Back-up alarm
  • Horn


  • Hydrostatic drive with 100% inching pedal
  • 100% Locking differentials, front and rear
  • Outboard planetary drives
  • 2-Speed travel
  • Spring applied parking brake
  • Multi wet disc brake
  • Available Heavy duty construction tire assembly
  • Available Flotation tire assembly


  • Pilot controls
  • Heavy duty hydraulic quick attach coupler
  • Auxiliary lines plumbed to the end of the loader arms
  • Auxiliary hydraulic detent
  • Hydraulic system test ports
  • Hydraulic oil level sight gauge
  • Remote mounted hydraulic oil cooler


  • Z-bar loader linkage
  • Bucket float function
  • Mechanical bucket positioning
  • Hydraulic bucket quick coupler
  • Available 81.5″ GP Combo bucket (1.30 cu yd)
  • Available Combo hitch to universal SSL adaptor
  • Available HD 48″ Pallet forks and frame
  • Available Flat face hydraulic coupler kit


  • ROPS / FOPS Level 2 Cab with front and rear wipers, rear window defrost, and heater
  • 2″ Retractable seat belt
  • Adjustable suspension seat with arm rest
  • Large steps and grab handles
  • Elevated operator’s station
  • Multi-function joystick for machine direction (Fwd / Rev), and loader controls (Raise, Lower, Curl, Dump)
  • Available Air conditioner
  • Available 3″ seat belt

Click on the images below to enlarge.

Call Us Today at 1-800-DURANTE for a Free Quote or to Schedule a Demo.