Takeuchi TL10V2 Track Loader

The TL10V2 features a vertical lift loader arrangement and it now meets EPA Final Tier 4 emissions standards.  The cab is completely redsigned and enlarged and now features a smooth low effort overhead door design for improved entry and egress. A quiet track design with flotation pads reduces vibration, noise levels, and improves ride quality.

Performance. Durability. Operator Comfort. Serviceability.

Performance TL12V2 Loader

  • Final Tier 4 Engine w/ DOC+DPF
  • Vertical Lift Loader Arrangement
  • Improved ROC
  • Quiet Track Design w/ Flotation Tread

Durability

  • Oversized Pins and BushingsTL12V2 Lifting
  • Heavy Duty Lift Cylinders w/Cushion
  • High Capacity Cooling Module
  • Welded Frame w/Multiple Cross Members

Operator Comfort

  • 5.7″ Color Multi-Information Display
  • Updated Cabin
  • Enhanced Overhead Door Performance
  • Improved Sound Suppression

Service and Uptime

  • Updated Tilt-Up Cab
  • Improved Battery Access
  • Increased Fuel Capacity
  • Centralized Filter Location

Takeuchi Fleet Management (TFM)

  • 2 Year Standard Equipment
  • Remote Diagnostics
  • Proactive Maintenance
  • Control Costs

Click the tabs below to view the Takeuchi TL10V2 Compact Track Loader product specifications.

Front Clearance Radius without Bucket
5 ft 0 in (1,535 mm)
Rear Clearance Radius
5 ft 5.2 in (1,655 mm)
Angle of Departure
30 degrees
Maximum Lift Height to Bucket Pin
10 ft 4.8 in (3,170 mm)
Dump Height Fully Raised
7 ft 11.9 in (2,435 mm)
Maximum Dump Angle Fully Raised
40.0 degrees
Maximum Bucket Rollback at Ground Level        
30.0 degrees
Reach Fully Raised
3 ft 1.4 in (950 mm)
Overall Width Without Bucket
5 ft 8.5 in (1,740 mm)
Overall Height
7 ft 5.4 in (2,270 mm)
Overall Length (with bucket)
12 ft 1.0 in (3,680 mm)
Minimum Ground Clearance
12.6 in (320 mm)

Hydraulic Reservoir Capacity
9.5 gal (36 L)
Hydraulic System Capacity
17.2 gal (65 L)
Auxiliary Hydraulic Flow
18.8 gal/min (71.2 L/min)
Auxiliary Hydraulic Flow – Optional High Flow
32.8 gal/min (124 L/min)
Hydraulic System Pressure (psi)
3,481 psi (24 MPa)

Operating Weight – Canopy
9,810 lb
(4,450ikg)
Operating Weight – Cab
10,130 lb
(4,585 kg)
Tipping Load
7,205 lb
(3,270 kg)
ROC (SAE J818 standard 35% tipping load*)       
4,107 lb
(1,863 kg)
Operating Load at 50% of Tipping Load
5,868 lb
(2,662 kg)
Bucket Breakout Force
6,520 lb
(2,960 kg)
Lift Arm Breakout Force
5,400 lb
(2,960 kg)
Traction Force
9,730 lb
(4,410 kg)
Bucket Capacity (SAE Heaped)
24 cu ft
(0.68 m3)
Cycle time
Raise-Full Load
4.3
seconds
Lower-No Load
3.0
seconds
Dump-Full Load
3.1
seconds
Curl-No Load
2.2
seconds
* Operating capacity of track loaders to be rated according
to SAE J818 at no more than 35% of the tipping load

Make / Model 
Kubota / V3307-CR-TE4B
Cylinders / Displacement
4/203 cu in (3.3 L)
Horsepower
74.3 hp (55.4 kW)
Tier Rating EPA Final Tier 4
Rated / Max Engine Speed
2,600 rpm
Maximum Torque
195 ft-lb @ 1,500 rpm (265 Nm)
Engine Lubrication
11.8 qt (11.2 L)
Cooling System
15.9 qt (15.0 L)
Fuel Tank Capacity
21.5 gal (81.0 L)
Fuel Consumption (65% of full load)       
2.7 gal/hr (10.3 L/hr)
Electrical System
12 volts / 60 amps

Traction Drive Type
Hydrostatic drive with double reduction planetary final drive
Parking Brake
Spring applied, hydraulically released
Track Roller Type
Permanently sealed rollers with precision metal face seals
Track Rollers
6 per side
Track Width
17.7 in (450 mm)
Track Ground Contact Length       
67.6 in (1,717 mm)
Ground Pressure – Canopy
4.8 psi (33.0 kPa)
Ground Pressure – Cab
4.9 psi (33.9 kPa)
Travel Speed – Low Range
5.0 mph (8.1 km/hr)
Travel Speed – High Range
7.8 mph (11.8 km/hr)

ENGINE

  • EPA Tier 4 compliant
  • Turbocharged engine with DOC/DPF after treatment
  • Automatic fuel-bleed system
  • Extended life coolant
  • Dual element air filter

ELECTRICAL

  • Electronic engine monitoring system
  • Rear View Camera
  • Fuel and coolant temperature gauge
  • 12 volt system with 60 amp alternator
  • LED work-lights, front and rear
  • Engine preheat
  • Hour meter
  • Back-up alarm

UNDERCARRIAGE and FRAME

  • Permanently sealed track rollers with metal face seals
  • Welded track frame with two cross members
  • 2-speed travel
  • 15.7″ quiet rubber track
  • Grease type track adjuster

HYDRAULICS

  • Cushioned boom cylinders
  • Automatic Power Control (APC)
  • Boom float with detent
  • Pilot proportional hydraulic controls
  • Pressure relieving flat faced coupler body
  • 14-pin connector with push button control
  • Hydraulic self leveling, up only
  • Available high flow auxiliary hydraulics, 32.8 gpm
  • Available ride control
  • Available control pattern change valve

WORKING EQUIPMENT

  • Vertical lift boom design
  • Mechanical quick coupler
  • Available Hydraulic quick coupler
  • Available 76″ HD smooth lip dirt bucket (20.3 cu ft)
  • Available 76″ HD dirt bucket with teeth (20.3 cu ft)
  • Available 7′ Six way dozer blade
  • Available HD 48″ pallet forks and frame

OPERATOR’S STATION

  • Tilt-up operator station
  • Pilot operated controls
  • High back, adjustable suspensions seat
  • Rear pivoting seat bar with integrated arm rests
  • Retractable seat belt
  • ROPS / FOPS structure
  • Available pressurized cab with roll-up door, air conditioning, heat, defrost, and wiper
  • Available 3″ seat belt
  • Available 3 point seat belt
  • AM / FM / Mp3 radio with NOAA weatherband

TAKEUCHI FLEET MANAGEMENT (TFM)

  • Minimize Downtime
  • Remote Diagnostics
  • Utilization Tracking
  • Proactive Maintenance
  • Control Cost

Click on the images below to enlarge.

Call Us Today at 718-697-6969 for a Free Quote or to Schedule a Demo.