Takeuchi TS80R2 Radial Lift Skid Steer Loader

The new TS80R2 is a large frame skid steer built to complete the most demanding tasks.  A new Deutz turbocharged engine delivers outstanding power, torque and reliability and features a maintenance free Diesel Oxidation Catalyst (DOC) exhaust system and centrally located service points to simplify maintenance and increase uptime.  The radial lift loader arrangement is well suited for flat work and demolition applications, and it provides excellent mid height reach.  The operator’s station features a lower threshold for easy entry and exit, an updated multi-function liquid crystal display (LCD) that keeps you informed of machine functions and performance, and a new dial type throttle control.  Low effort pilot controls are comfortable, precise, and low maintenance delivering consistent, reliable performance day in and day out.  While a proportional slide switch control allows you to meter the flow of oil to a hydraulic attachment with ease and efficiency.  For greater durability mechanical face seals are used in the axle pods keeping dirt, debris, and water out of critical components, and the purpose built uni-frame design ensures many years of service from your Takeuchi skid steer.

For more information, or to demo the Takeuchi TS80R2 skid steer, please call us at 1-800-DURANTE or visit one of our showrooms in the tri-state area. Don’t forget to ask about our 0% financing!

Performance. Durability. Operator Comfort. Serviceability.

Click the tabs below to view the Takeuchi TS80R2 skid steer product specifications.

Maximum Lift Height to Bucket Pin 10 ft 5 in (3,175 mm)
Dump Height Fully Raised 8 ft 4 in (2,540 mm)
Dump Reach Fully Raised 2 ft 1 in (635 mm)
Maximum Bucket Rollback at Ground       30°
Maximum Dump Angle Fully Raised 34°
Transport Length 12 ft 1.5 in (3,696 mm)
Machine Length 9 ft 3.5 in (2,832 mm)
Wheel Base 4 ft 1 in (1,242 mm)
Angle of Departure 24°
Ground Clearance 10.5 in (267 mm)
Overall Width – Wide Position 6 ft 0 in (1,828 mm)
Overall Width – Wheel Reversed 5 ft 6 in (1,676 mm)
Overall Height 7 ft 0 in (2,134 mm)

Hydraulic Reservoir Capacity         10.0 gal (37.8 L)
Auxiliary Hydraulic Flow
Auxiliary Hydraulic Flow (High Flow Option)
21.5 gal/min (81.0 L / min)
31.0 gal/min (117.3 Lpm
Hydraulic System Pressure 3,335 psi (22.7 MPa)

Operating Weight (Canopy)          7,950 lbs (3,606 kg)
Tipping Load, Dirt Bucket 4,720 lbs (2,140 kg)
Rated Operating Capacity 2,360 lbs (1,070 kg)
Bucket Breakout Force 5,845 lbs (2,651 kg)
Lift Arm Breakout Force 7,080 lbs (3,211 kg)
Traction Force 8,700 lbs (3,946 kg)

Tier Rating
Deutz / TD2.9L4, Turbocharged
EPA Interim Tier 4
Cylinder/Displacement        4 / 177 in³ (2.9 L)
Horsepower Gross 74 hp (55 kW)
Rated Engine Speed 2,600 rpm
Maximum Torque 192 ft-lb (260 Nm)
Engine Lubrication 9.0 qts (8.5 L)
Cooling System 20.0 qts (19.0 L)
Fuel Tank Capacity 28.0 gal (106.0 L)
Electrical System 12 volts / 95 amps

Traction Drive Type Hydrostatic
Chain Case Bow Tie Drive System
Chain Size 100 ANSI
Wheel Size 12 x 16.5
Width Over Tires 72 in (1,829 mm)
Maximum Travel Speed      
Optional Two Speed
8.2 mph (13.1 km / hr)
11.0 mph (17.7 km / hr)


  • EPA Final Tier 4 compliant
  • Turbocharged
  • DOC Only
  • Engine driven fan
  • Swing-out cooling module
  • Dual element air cleaner
  • Available engine block heater
  • Available rear door screen guard


  • LCD multi-function machine monitoring system
  • 12 volt system with 95 amp alternator
  • Work lights: (2) front and (2) rear
  • Hour meter
  • Back-up alarm


  • Mechanical faced axle seals
  • Hydrostatic drive system
  • 100 ANSI chain
  • Offset wheels are reversible for narrow or wide stance
  • Heavy duty tires
  • Available over the tire tracks (OTT)
  • Available flotation tires
  • Available foam filled tires
  • Available solid tires
  • Available two-speed travel


  • Boom float with detent
  • Pilot proportional hydraulic controls
  • Pressure relieving flat faced coupler body
  • Auxiliary hydraulic flow of 21.5 gpm (81.0 L / min)
  • 14 Pin attachment connector
  • Available hydraulic quick coupler
  • Available high flow auxiliary hydraulics
  • Available self leveling On/Off (up)
  • Available ride control accumulator


  • Radial boom design
  • Mechanical quick coupler
  • Available hydraulic quick coupler
  • Available 67” smooth lip bucket (16.2 cu. ft.) (narrow wheel position)
  • Available 72” smooth lip bucket with bolt-on cutting edge (17.8 cu. ft.)
  • Available attachment control kit with 8 pin connector
  • Available bolt-on tooth bar
  • Available 42” pallet forks


  • Tilt-up operator station
  • Pilot operated joystick controls
  • Rear pivoting seat bar with integrated arm rests
  • ROPS / FOPS structure
  • 12 volt power outlet
  • Available 3″ seat belt
  • Available deluxe air suspension seat
  • Available pressurized cab with swing out door
  • Available air conditioner, heat and defrost
  • Available AM / FM / MP

Click on the images below to enlarge.

Call Us Today at 1-800-DURANTE for a Free Quote.