Takeuchi TS80V2 Vertical Lift Skid Steer Loader

The new TS80V2 is a large frame skid steer built to complete the most demanding tasks.  A new Deutz turbocharged engine delivers outstanding power, torque and reliability and features a maintenance free Diesel Oxidation Catalyst (DOC) exhaust system and centrally located service points to simplify maintenance and increase uptime.  The vertical lift loader arrangement improves stability and is ideal for load and carry applications.  The operator’s station features a lower threshold for easy entry and exit, an updated multi-function liquid crystal display (LCD) that keeps you informed of machine functions and performance, and a new dial type throttle control.  Low effort pilot controls are comfortable, precise, and low maintenance delivering consistent, reliable performance day in and day out.  While a proportional slide switch control allows you to meter the flow of oil to a hydraulic attachment with ease and efficiency.  For greater durability mechanical face seals are used in the axle pods keeping dirt, debris, and water out of critical components, and the purpose built uni-frame design ensures many years of service from your Takeuchi skid steer.

For more information, or to demo the Takeuchi TS80V2 skid steer, please call us at 914-347-6969 or visit one of our showrooms in Elmsford or the Bronx. Don’t forget to ask about our 0% financing!

Performance. Durability. Operator Comfort. Serviceability.

Click the tabs below to view the Takeuchi TS80V2 vertical skid steer product specifications.

Maximum Lift Height to Bucket Pin 10 ft 10 in (3,302 mm)
Dump Height Fully Raised 8 ft 7 in (2,616 mm)
Dump Reach Fully Raised 3 ft 0 in (914 mm)
Maximum Bucket Rollback at Ground       30°
Maximum Dump Angle Fully Raised 39°
Transport Length 12 ft 2 in (3,708 mm)
Machine Length 9 ft 1 in (2,763 mm)
Wheel Base 4 ft 1 in (1,242 mm)
Angle of Departure 24°
Ground Clearance 10.5 in (266 mm)
Overall Width – Wide Position 6 ft 0 in (1,828 mm)
Overall Width – Wheel Reversed 5 ft 6 in (1,676 mm)
Overall Height 7 ft 0 in (2,134 mm)

Hydraulic Reservoir Capacity         10.0 gal (37.8 L)
Auxiliary Hydraulic Flow
Auxiliary Hydraulic Flow (High Flow Option)
26.0 gal/min (98.4 L / min)
31.0 gal/min (117.3 Lpm
Hydraulic System Pressure 3,335 psi (22.7 MPa)

Operating Weight (Canopy)          8,965 lbs (4,066 kg)
Tipping Load, Dirt Bucket 6,010 lbs (2,726 kg)
Rated Operating Capacity, Dirt Bucket 3,005 lbs (1,363 kg)
Bucket Breakout Force 5,920 lbs (2,685 kg)
Lift Arm Breakout Force 6,200 lbs (2,812 kg)
Traction Force 8,700 lbs (3,946 kg)

Make/Model
Tier Rating
Deutz / TD2.9L4, Turbocharged
EPA Final Tier 4
Cylinder/Displacement        4 / 177 in³ (2.9 L)
Horsepower Gross 74 hp (55 kW)
Rated Engine Speed 2,600 rpm
Maximum Torque 192 ft-lb (260 Nm)
Engine Lubrication 9.0 qts (8.5 L)
Cooling System 20.0 qts (19.0 L)
Fuel Tank Capacity 28.0 gal (106.0 L)
Electrical System 12 volts / 95 amps

Traction Drive Type Hydrostatic
Chain Case Bow Tie Drive System
Chain Size 100 ANSI
Wheel Size 12 x 16.5
Width Over Tires 72 in (1,829 mm)
Maximum Travel Speed      
Single
Optional Two Speed
.
8.2 mph (13.1 km / hr)
11.0 mph (17.7 km / hr)

ENGINE

  • EPA Final Tier 4 compliant
  • Turbocharged
  • DOC Only
  • Engine driven fan
  • Swing-out cooling module
  • Dual element air filter
  • Available engine block heater
  • Available rear door screen guard

ELECTRICAL

  • LCD multi-function machine monitoring system
  • 12 volt system with 95 amp alternator
  • Work lights: (2) front and (2) rear
  • Hour meter
  • Back-up alarm

DRIVE TRAIN AND FRAME

  • Mechanical faced axle seals
  • Hydrostatic drive system
  • 100 ANSI chain
  • Offset wheels are reversible for narrow or wide stance
  • Heavy duty tires
  • Available over the tire tracks (OTT)
  • Available flotation tires
  • Available foam filled tires
  • Available solid tires
  • Available two-speed travel

HYDRAULIC

  • Boom float with detent
  • Pilot proportional hydraulic controls
  • Pressure relieving flat faced coupler body
  • Auxiliary hydraulic flow of 28.0 gpm (106.0 L / min)
  • Available hydraulic quick coupler
  • Available high flow auxiliary hydraulics
  • Available self leveling On/Off (up)
  • Available ride control accumulator

WORKING EQUIPMENT

  • Radial boom design
  • Mechanical quick coupler
  • Available hydraulic quick coupler
  • Available 67” smooth lip bucket (16.2 cu. ft.) (narrow wheel position)
  • Available 72” smooth lip bucket with bolt-on cutting edge (17.8 cu. ft.)
  • Available attachment control kit with 8 pin connector
  • Available bolt-on tooth bar
  • Available 48” pallet forks

OPERATOR’S STATION

  • Tilt-up operator station
  • Pilot operated joystick controls
  • Rear pivoting seat bar with integrated arm rests
  • ROPS / FOPS structure
  • 12 volt power outlet
  • Available 3″ seat belt
  • Available deluxe air suspension seat
  • Available pressurized cab with swing out door
  • Available air conditioner, heat and defrost
  • Available AM / FM / MP3 radio with NOAA weather band

Click on the images below to enlarge.

Call Us Today at 718-697-6969 for a Free Quote or to Schedule a Demo.