Takeuchi TS50R Radial Skid Steer Loader

The new Takeuchi TS50R skid steer is big on performance, value and features.  The operator’s station on the TS50R features well positioned gauges, warning lights, and operational switches that are easy to see and operate.  Low effort pilot controls are very efficient and precise allowing the operator to be more productive and remain comfortable throughout the day, and a proportional slide switch provides outstanding control when operating a hydraulic attachment.  The mechanical face seals on the Takeuchi TS50R are standard equipment keeping dirt, debris, and water out of critical components, and a purpose built uniframe design ensures many years of service from your Takeuchi TS50R skid steer.

For more information, or to demo the Takeuchi TS50R skid steerplease call us at 1-800-DURANTE or visit one of our showrooms in the tri-state area. Don’t forget to ask about our 0% financing!

Performance. Durability. Operator Comfort. Serviceability.

Click the tabs below to view the Takeuchi TS50R skid steer product specifications.

Maximum Lift Height to Bucket Pin 9 ft 7 in (2,921 mm)
Dump Height Fully Raised 7 ft 3 in (2,210 mm)
Dump Reach Fully Raised 1 ft 9.7 in (552 mm)
Maximum Bucket Rollback at Ground      27°
Maximum Dump Angle Fully Raised 40°
Transport Length 11 ft 4.6 in (3,470 mm)
Machine Length 8 ft 6.5 in (2,604 mm)
Wheel Base 3 ft 4.6 in (1,031 mm)
Angle of Departure 28°
Ground Clearance 10.5 in (267 mm)
Overall Width – Wide Position 5 ft 6 in (1,676 mm)
Overall Width – Wheel Reversed 5 ft 0 in (1,524 mm)
Overall Height 6 ft 5 in (1,956 mm)

Hydraulic Reservoir Capacity                 8.0 gal (30.2 L)
Auxiliary Hydraulic Flow 17.1 gal/min (65 L / min)
Hydraulic System Pressure
3,335 psi (22.9 MPa)

Operating Weight (Canopy)                    6,475 lbs (2,937 kg)
Tipping Load 3,000 lbs (1,361 kg)
Rated Operating Capacity 1,500 lbs (680 kg)
Bucket Breakout Force 3,900 lbs (1,770 kg)
Lift Arm Breakout Force 3,000 lbs (1,360 kg)
Traction Force 8,453 lbs (3,834 kg)

Make/Model Perkins / 404D-22 Naturally Aspirated
Cylinder/Displacement                           4 / 135 in³ (2.2 L)
Horsepower Gross 50 hp (37.3 kW)
Rated Engine Speed 2,800 rpm
Maximum Torque 105 ft-lb (143 Nm)
Engine Lubrication 11.2 qt (10.6 L)
Cooling System 14.0 qt (13.2 L)
Fuel Tank Capacity 25.0 gal (95.0 L)
Electrical System 12 volts / 65 amps

Traction Drive Type                               Hydrostatic
Chain Case Bow Tie Drive System
Chain Size 80 ANSI
Wheel Size 10 x 16.5
Width Over Tires 66 in (1,676 mm)
Maximum Travel Speed
Optional Two Speed
8.2 mph (13.2 km / h)
11.7 mph (18.8 km / h)


  • EPA Tier 4i compliant
  • Engine driven fan
  • Swing-out cooling module
  • Dual element air cleaner
  • Available engine block heater


  • Machine monitoring system
  • Tachometer, fuel, and coolant gauges
  • 12 volt system with 65 amp alternator
  • Halogen work lights, front and rear
  • Hour meter
  • Back-up alarm


  • Mechanical faced axle seals
  • Hydrostatic drive system
  • 80 ANSI chain
  • Offset wheels are reversible for narrow or wide stance
  • Heavy duty tires
  • Available over the tire tracks


  • Radial lift path with rugged loader arms
  • Boom float with detent
  • Pilot proportional hydraulic controls
  • Pressure relieving flat faced coupler body
  • Auxiliary hydraulic flow of 17.1 gpm (65 L / min)


  • Radial boom design
  • Mechanical quick coupler
  • Available hydraulic quick coupler
  • Available 63” smooth lip bucket (narrow wheel position)
  • Available 67” smooth lip bucket
  • Available attachment control kit with 8 pin connector
  • Available bolt-on tooth bar
  • Available 42” pallet forks


  • Tilt-up operator station
  • Pilot operated joystick controls
  • Rear pivoting seat bar with integrated arm rests
  • ROPS / FOPS structure
  • 12 volt power outlet
  • Available deluxe suspension seat
  • Available pressurized cab with heat
  • Available pressurized cab with air conditioner and heat
  • Available AM / FM / MP3 radio with NOAA weather band

Click on the images below to enlarge.

Call Us Today at 1-800-DURANTE for a Free Quote or to Schedule a Demo.