Takeuchi TB216H Hydraulic Excavator

The compact size and dual power capabilities of the Takeuchi TB216H allow it to work in a wide range of applications that may have limited accessibility and noise and clean air requirements.  It is ideal for plumbing, landscaping, utility installation, interior demolition, and rental applications.  Performance is identical between the diesel engine and electric motor, and the controls are the same regardless of operating mode.

Performance

  • Powerful Electric Motor
  • Final Tier 4 Yanmar Engine
  • Independent Pumps for Motor and Engine
  • Identical Controls
Durability

  • Protective Cover and Bracing
  • Cable Protection
  • Cushioned Cylinders
  • Top Mounted Boom Cylinder
Comfort and Convenience

  • Simple Operation of Diesel or Electric Mode
  • Pilot Joystick Controls
  • Pattern Change Valve
  • Multi-Information LED Display
Service and Uptime

  • Swing-out Motor
  • Access to Daily Inspection Points
  • Automatic Fuel Bleed System
  • Lockable Fuel Fill with Sight Gauge

Click the tabs below to view the Takeuchi TB216H Hydraulic Excavator product specifications.

Max Dig Depth
Max Dump Height
Max Reach Ground Level
Max Vertical Dig Depth
Width (Retracted)
Width (Expanded)
Height (Transport)
Length (Transport)
Ground Clearance
Independent Boom Swing Angle
Minimum Front Swing Radius (Straight)     
Minimum Front Sing Radius (Offset)
Tail Swing Radius
7 ft 10 in (2,390 mm)
8 ft 10.5 in (2,705 mm)
13 ft 2.9 in (4,035 mm)
6 ft 9 in (2,060 mm)
38.6 in  (980 mm)
51.2 in (1,300 mm)
7 ft 4.8 in (2,255 mm)
13 ft 6.8 in (4,135 mm)
8.1 in  (205 mm)
80° Left / 50° Right
4 ft 10.3 in (1,480 mm)
3 ft 9.4 in (1,155 mm)
4 ft 4.5 in (1,335 mm)

Operating Weight (Canopy)
Maximum Digging Depth
Maximum Dump Height
Maximum Reach
Maximum Bucket Breakout Force
Maximum Arm Digging Force
Arm Length
Slew speed
Traction Force
4,277 lb (1,940 kg)
7 ft 10 in (2,390 mm)
8 ft 10.5 in (2,705 mm)
13 ft 5 in (4,090 mm)
4,250 lb (1,928 kg)
1,843 lb (836 kg)
3 ft 8.5 in (1,130 mm)
9.2 rpm
4,361 lb (1,978 kg)

Undercarriage:

Traction Drive Type
Parking Brake
Track Roller Type
Track Rollers (per side)
Track Width
Track Ground Contact Length
Ground Pressure
Maximum Travel Speed (Low Range)
Maximum Travel Speed (High Range)
Planetary Drive Reduction w/ Auto Shift Down
Spring Applied, Hydraulically Released
Permanently Sealed, Triple Flanged Rollers
3
9 in (230 mm)
3 ft 9.5 in (1,155 mm)
4.3 psi (29.6.1 kPa)
1.4 mph (2.2 km/hr)
2.6 mph (4.2 km/hr)

Pump Type

Total Hydraulic Flow
Primary Auxiliary Hydraulic Flow
System Operating Pressure
Hydraulic Reservoir Capacity
Hydraulic System Capacity

Twin Variable Displacement Piston Pumps
w/ Two Gear Pumps
13.4 gal/min (50.9 L/min)
8.9 gal/min (33.6 L/min)
3,046 psi (21.0 MPa)
4.2 gal (16.0 L)
6.5 gal (24.5 L)

Make/Model
Tier Rating
Cylinders/Displacement
Horsepower
Rated Engine Speed
Maximum Torque
Engine Lubrication
Cooling System
Fuel Tank Capacity
Fuel Consumption (65% of full load)
Electrical System
Yanmar / 3TNV74
EPA Final Tier 4
3/60.6 cu in (.99 L)
14.9 hp (11.1 kW)
2,400 rpm
38.2 ft-lb @ 1,800 rpm (51.8 Nm)
4.5 qt (4.3 L)
4.0 qt (3.8 L)
5.8 gal (22.0 L)
0.63 gal/hr (2.4 L/hr)
12 volts / 40 amps

Electric Motor with High Voltage Connection Provides 100% Emission Free Operation and Full Functionality 
Horsepower
Rated Speed
Electrical Connection
14.2 hp (10.6 kW)
2,400 rpm
400 – 480 volts / 47-63Hz / Fused with min. 32A

ENGINE

  • EPA Final Tier 4 Compliant
  • Engine Preheat Starting Aid
  • Extended Life Coolant
  • Automatic Fuel Bleed System
  • Dual Element Air Filter

ELECTRICAL

  • Maintenance Free Electric Motor
  • Electrical Connection 400-480v / 47-63Hz / Fused with Minimum 32A
  • Multi Information Display that Includes Visual and Audible Alerts for Engine Warning, Engine Oil Pressure, Battery Charge Level and Coolant Temperature
  • Visual Indicators for Engine Pre-Heat, High Speed, Water Temperature and Fuel Gauge
  • Function Keys Transition Between Hour/Trip Meter, Time and Alarm, and Contrast Adjustment
  • 12 Volt System with 40 Amp Alternator
  • Canopy and Boom Mounted Work Lights
  • Hour Meter
  • Travel Alarm
  • Horn

UNDERCARRIAGE and FRAME

  • Triple Flange Track Rollers
  • Hydraulically Retractable Track Frame
  • Low and High Range Travel with Auto Downshift
  • Adjustable Width Backfill Blade
  • Cast Iron Wrap Around Protective Counterweight
  • 9″ Rubber Track

HYDRAULICS

  • Variable Displacement Piston Pumps
  • Cushioned Boom and Swing Cylinders
  • Precise and Responsive Pilot Controls
  • Hydraulic Oil Cooler and Sight Gauge
  • Primary Auxiliary Circuit Plumbed to Arm with One-Way and Two-Way Operation

WORKING EQUIPMENT

  • Topside Boom Cylinder
  • Hydraulic Hoses Protected Inside of Boom and Arm
  • Long Arm with Integrated Thumb Mount
  • Available Dual Pin Position Bucket
  • Available Mechanical Bucket Quick Coupler
  • Available Main Pin Hydraulic Thumb

OPERATOR’S STATION

  • ROPS / TOPS / FOPS Four Post Canopy
  • Quick Change Control Patter (ISO or SAE)
  • Suspension Seat with Fore and Aft Adjustments
  • Auxiliary Hydraulics Controlled with Foot Pedal
  • 2″ Reatractable Seat Belt
  • Available 3″ Non-Retractable Seat Belt

Click on the images below to enlarge.

Call Us Today at 718-697-6969 for a Free Quote or to Schedule a Demo.